The GD-3B double motor large multi-strand enameled wire grinder includes a mechanical transmission, which also includes two paint stripping wheels, including a first paint stripping wheel and a second paint stripping wheel. The first paint stripping wheel and the second paint stripping wheel are driven by mechanical transmission, respectively. The surface of the first paint stripping wheel and the second paint stripping wheel is rough. The enameled flat copper wire extends into the gap between the first paint stripping wheel and the second paint stripping wheel. The advantage is that the enameled flat copper wire extends into the gap between the first paint stripping wheel and the second paint stripping wheel. The first paint stripping wheel and the second paint stripping wheel with a rough surface are subjected to friction on both sides of the flat copper wire under the high-speed rotation of the mechanical transmission device.Enameled flat copper wire The removal of paint greatly improves work efficiency, eliminates the need for chemical reagents in traditional processes, avoids damage to the human body or the environment, and avoids the corrosive effect of chemical reagents on the copper wire body, improving product quality.
SpecificationsGrid
| Machine Model | GD-3B | Applicable wire diameter | 0.15mm-10mm round wire 1*1 and 50mm*50mm flat wire |
| Motor power | 370-450W*2 | Operating Voltage | 220v/50Hz |
| Machine Weight | 80kg | speed | 1400r/min |
| Stripping length | 5mm－100mm | Optional accessories | Wire Wheel |
Workstation operating procedure for multi-strand enameled wire grinding machines!
Installation and Use
Select the appropriate paint stripping wheel, install it on the machine, place the enameled wire in the middle of the two paint stripping wheels, adjust the two paint stripping wheels until the enameled wire is gently clamped, hold the coil part with your hand and start the switch to test the paint stripping effect, which can be adjusted The paint stripping wheel The pressure of the contact surfaces with each other is controlled to achieve the desired paint stripping effect.
When working, the enameled wire is placed in the middle between the paint stripping wheels, and then the enameled wire is easily pulled out from the paint stripping wheels, and the paint stripping work is completed, because when the machine is working, The paint stripping wheel High-speed rotation grinds off the insulating paint or oxide of the enameled wire, stripping the enameled wire, and the surface is bright and clean.
GD-3B Multi-strand enameled wire grinder Can be stripped paint wire diameter such as: about 0.30 mm more than 600 heads. While perfecting the machine products, the supporting products also need to keep up. However, it should be noted that different manufacturers have different products. Inevitably, there is a big problem of tension in the process of operation. The wire diameter is thicker, and there are more thread heads. The next consideration is to cooperate with the manufacturer to further improve the supporting fixture. Cooperate with the technical staff of the manufacturer to jointly develop the operation process.
When you need to replace the paint stripping wheel, simply pull the paint stripping wheel that can no longer be used from the shaft and insert a new paint stripping wheel to start working again.
Zhongshan Risheng Hardware Products Co., Ltd. is mainly engaged in the research and development, manufacturing and sales of Enameled wire paint grinder、Multi-strand line Grind Lacquer machine, Aluminum enameled wire Grind Lacquer machine sales, Grind Lacquer machine, Enameled wire patent leather grinder、Painting leather grinder、 Wire Grinder Manufacturing, Enameled wire grinder、Polished leather thread、Patent leather machine Mainly production and so on.
