Yong'an Road, Dongxing Community, Dongfeng Town, Zhongshan City Monday to Saturday 08:30 - 18:00
Menu navigation
National Service Hotline
139-2819-1922

GD-3 Multi-Strand Enameled Wire Stripping Machine Video

The GD-3 multi-strand wire stripping machine has a unique "full contact" high-speed special paint stripping steel wheel, which can automatically adjust the curvature of the wire body and completely remove any hard insulating paint, enamel paint, ML, lsonel, etc. on the wire surface without damaging the copper (aluminum) wire itself. In the absence of serious pollution and hazards, the paint stripping work is fast and safe.Suitable wire diameter range: 0.14mm-3.8mm, suitable for circular and square lines, and can...

The GD-3 multi-strand wire stripping machine has a unique "full contact" high-speed special paint stripping steel wheel, which can automatically adjust the curvature of the wire body, and completely remove any hard insulating paint, enamel paint, ML, lsonel, etc. on the wire surface without damaging copper.(Aluminum)wire itself. In the absence of serious pollution and hazards, the paint stripping work is fast and safe.Suitable wire diameter range: 0.14mm-3.8mm, suitable for circular and square lines, and canSimultaneously processMulti-strand enameled wire strippingEasy to operate and excellent results.
SpecificationsGrid

Machine ModelGD -3Multi-Strand Enameled Wire Enamel Removal MachineApplicable wire diameter0.14-3.8mm
Machine Dimensions480x300x250mmOperating Voltage220v/50Hz
Motor power370-450wspeed3330r/min
Machine Weight35kgOptional accessoriesWire Wheel
Belt size730x30x2mmStripping length3mm - Infinite

Installation and Use
Select the appropriate paint stripping wheel, install it on the machine, place the enameled wire in the middle of the two paint stripping wheels, and adjust the twoThe paint stripping wheelUntil the enameled wire is gently clamped, hold the coil part by hand and then start the switch to test the paint stripping effect. The pressure of the contact surfaces between the paint stripping wheels can be adjusted to control the desired paint stripping effect.
When working, the enameled wire is placed in the middle between the two stripping wheels, and then the enameled wire is easily pulled out from between the stripping wheels, and the stripping work is completed, because when the machine is working,The paint stripping wheelHigh-speed rotation grinds off the insulating paint or oxide of the enameled wire, stripping the enameled wire, and the surface is bright and clean.
Needs a new oneThe paint stripping wheel, as long as the unusable paint stripping wheel is pulled out of the shaft, and then a new paint stripping wheel is inserted, you can start working again. (Pay attention to the directionality of the wire wheel when installing the wire stripping wheel)

Zhongshan Risheng Hardware Products Co., Ltd. is mainly engaged in the research and development, manufacturing and sales ofEnameled wire stripping machine、Multi-strand wire paint remover、Aluminum Enameled Wire De-painting MachineSales,paint removerProduction,enameled wire stripping leather machine、Unpainted Leather MachineMainly production and so on.

Online inquiry / selection advice

Tell us your wire diameter and requirements; we will get back to you during business hours

Your information is only used for selection and quotation and will not be made public

Call us WeChat Products Online inquiry