Zhongshan Risheng Stripping Equipment Parts
Professional manufacturer of enameled wire stripping machines - paint removal machines - stripping consumables
GD-6B Four-claw enameled wire stripping machine | The enameled wire stripping machine uses the latest processing technology and is uniquely designed. The tool material is made of four extra-hard tungsten alloy rods. Knife edge centripetal point cutting, taper adjustable principle. And the unique design of convenient and fast chip removal. Combined with the convenience of unloading and adjustment, and the flexible use of the safety shield, it is based on the user's thoughts and the user's urgency. The product has been trusted and praised by users in the process of being put on the market. This product solves the problem that the wire diameter is slightly bent and the one-time paint stripping is not clean during the current user's use. This product is currently an ideal product for users to trust and safety.
GD-6BEnameled Wire Stripper | Enameled Wire StrippingMachine, applicable wire diameter range: about 0.35 —5mm. It can completely remove any hard insulating paint, enamel paint, ML, lsonel, etc. on the wire surface without damaging the copper wire itself. Especially suitable for use until the bottom of the coil, easy to use, excellent effect, GD-6BFour-claw paint stripper | Enameled wire paint stripperThere is a paint stripping length termination device, which can accurately control the paint stripping length of the enameled wire, and the paint stripping work is fast and safe without serious pollution and hazards.
Specification:
| Model | GD-6B Patent Stripping Machine | Applicable wire diameter | 0.35 —5mm or so |
| Machine Dimensions | 280*200*150mm | Operating Voltage | 220V/50HZ |
| Motor power | 120W | Motor speed | 2800r/min |
| Machine Weight | 6.0KG | Tool material | Made of hard tungsten steel alloy |
| Brand | Risheng Hardware | Stripping length | 2mm—70mm |
Operation method: [See the instruction manual of the operation example for details]
A. Plug into 220V/AC power supply. B. First remove the guard from the blade section. Adjust the scraping edge according to the required scraping wire diameter; Loosen the fixed knife edge and the headless hexagon socket screw that needs to be positioned (see the illustration of the example figure for details).
C. Rotate the adjusting nut (to adjust the scraping opening: clockwise larger, counterclockwise smaller). Generally first set the opening slightly larger than the wire diameter, then clamp the wire end. Hold the enameled wire in one hand and adjust the nut with the other until the blade slightly rubs the surface of the enameled wire, then lock all the screws to be fixed.
D. The limiting pin is adjusted and locked, and the protective cover is installed.
E. Press the power switch and the motor starts running.
F. Hold the enameled wire that needs to be scraped flat and extend into the inlet, and begin to remove the paint.
Zhongshan Risheng Hardware Products Co., Ltd. is mainly engaged in the research and development, manufacturing and sales ofEnameled Wire Stripping Machine、Magnetic loop coil paint stripper、Paint Remover for De-painting Roots、Copper coated aluminum enameled wire stripping machineSales,Aluminum Enameled Wire Stripping Machine、Lacquer stripperProduction,Enameled wire stripping leather machine、Leather stripping machineMainly production and so on.
