Zhongshan Risheng Stripping Equipment Parts
Professional manufacturer of enameled wire stripping machines - paint removal machines - stripping consumables
The GD-6A new fully automatic four-jaw enameled wire stripping machine is our company's newly developed product: uniquely designed using the latest processing technology. The blade is made of four extra-hard tungsten alloy rods. Knife edge centripetal point cutting, taper adjustable principle. And the unique design of convenient and fast chip removal. Combined with the convenience of unloading and adjustment, and the flexible use of the safety shield, it is based on the user's thoughts and the user's urgency. The product has been trusted and praised by users in the process of being put on the market. Solved the problem that the wire diameter is slightly bent and the one-time paint stripping is not clean, and the problem of slow tooling speed with different wire diameters in the production process, this product is currently an ideal product that users can trust and safe. (Different wire diameters and the same set of tools, one-time adjustment of the tool is only a few seconds or so, no tools are needed, convenient and fast.
The GD-6A new four-jaw enameled wire stripping machine, applicable wire diameter range: about 0.3-8.0mm. It can completely remove any hard insulating paint, enamel paint, ML, lsonel, etc. on the wire surface without damaging the copper wire itself. Especially suitable for cases that must be stripped right down to the coil bottom, easy to operate with excellent results. The GD-6A-5 new fully automatic four-jaw enameled wire stripping machine is equipped with a stripping length stop device that accurately controls the stripping length. Without serious pollution or hazards, the stripping work is fast and safe.
Specification:
| Model | GD-6A The newest four-claws | Applicable wire diameter | About 0.3-8mm |
| Machine Dimensions | 280*200*150mm | Operating Voltage | 220V/50HZ |
| Motor power | 120W | Motor speed | 2800r/min |
| Machine Weight | 8.5KG | Tool material | Made of hard tungsten steel alloy |
| Brand | Risheng Hardware | Stripping length | 2mm—70mm |
Operation method: [See the operation example diagram for details]
A. Plug in the 220V AC power supply.
B. Remove the shield from the blade head part first. Adjust the scraping edge according to the required scraping wire diameter; Use your hand to twist the adjustment nut to a large clockwise and a small counterclockwise adjustment of the wire diameter tool size, without any adjustment tools.
C. Turn the adjusting nut (adjust the size of the scraping blade edge, large clockwise and small counterclockwise), take the enameled wire in one hand, adjust the adjusting nut in the other hand, and there is slight friction between the blade edge and the surface of the enameled wire diameter, then tighten the retaining ring with your hand.
D. The limiting pin is adjusted and locked, and the protective cover is installed.
E. Press the power switch and the motor starts running.
F. Hold the enameled wire that needs to be scraped flat and extend into the inlet, and begin to remove the paint.
Zhongshan Risheng Hardware Products Co., Ltd. is mainly engaged in the research and development, manufacturing and sales ofEnameled wire stripping machines, four-jaw stripping machines, fully automatic stripping machines, magnetic ring coil stripping machines, root-level enamel removal stripping machines, copper-clad aluminum enameled wire stripping machine sales, aluminum enameled wire stripping machines, stripping machine production, enameled wire film stripping machines, stripPatent leather machine production and so on.
