Working principle of the dust-absorbing fully automatic four-jaw enameled wire stripping machine!

The GD-6A new automatic four-claw enameled wire stripping machine is the latest new product developed and successfully developed by our company: it adopts the latest processing technology and is designed exclusively. The blade is made of four extra-hard tungsten alloy rods. Knife edge centripetal point cutting, taper adjustable principle. And the unique design of convenient and fast chip removal. Combined with the convenience of unloading and adjustment, and the flexible use of the safety shield, it is based on the user's thoughts and the user's urgency. The product has been trusted and praised by users in the process of being put on the market.Solved the problem that the wire diameter is slightly bent and the one-time paint stripping is not clean, and the problem of slow tooling speed with different wire diameters in the production process, this product is currently an ideal product that users can trust and safe. (Different wire diameters and the same set of tools, one-time adjustment of the tool is only a few seconds or so, no tools are needed, convenient and fast.
GD-6A-5 new Four-claw enameled wire paint remover, Applicable wire diameter range: about 0.25-5.0mm. It can completely remove any hard insulating paint, enamel paint, ML, lsonel, etc. on the wire surface without damaging the copper wire itself. Especially suitable for peeling paint to the bottom of the coil, easy to operate and excellent results, the new GD-6A-5 is fully automatic Four-claw enameled wire Take off The lacquer machine is equipped with a paint stripping length termination device, which can accurately control the paint stripping length of the enameled wire, and the paint stripping work is fast and safe without serious pollution and hazards.Can be equipped with a vacuum cleaner

Specification:

Model	GD-6A-5 The newest four-claws	Applicable wire diameter	0.25 —5mm or so
Machine Dimensions	280*200*150mm	Operating Voltage	220V/50HZ
Motor power	120W	Motor speed	2800r/min
Machine Weight	8.5KG	Tool material	Made of hard tungsten steel alloy
Brand	Risheng Hardware	Stripping length	2mm—70mm

Operation method: [See the operation example diagram for details]
A. Plug in the 220V AC power supply.
B. Remove the shield from the blade head part first. Adjust the scraping edge according to the required scraping wire diameter; Use your hand to twist the adjustment nut to a large clockwise and a small counterclockwise adjustment of the wire diameter tool size, without any adjustment tools.
C. Turn the adjusting nut (adjust the size of the scraping blade edge, large clockwise and small counterclockwise), take the enameled wire in one hand, adjust the adjusting nut in the other hand, and there is slight friction between the blade edge and the surface of the enameled wire diameter, then tighten the retaining ring with your hand.
D. The limiting pin is adjusted and locked, and the protective cover is installed.
E. Press the power switch and the motor starts running.
F. Hold the enameled wire that needs to be scraped flat and extend into the inlet, and begin to remove the paint.

Zhongshan Risheng Hardware Products Co., Ltd. is mainly engaged in the research and development, manufacturing and sales of Enameled wire Take off Lacquer machine, Four-clawed Take off Lacquer machine, Fully automatic Take off Lacquer machine, Magnetic loop coil Stripping Offline, Depaint the roots Take off Lacquer machine, Copper-clad aluminum enameled wire Take off Lacquer machine sales, Aluminum enameled wire Take off Lacquer machine,Take off lacquer machine production, enameled wire stripping leather machine、Take off Patent leather machine production and so on.