Five major advantages of Zhongshan Risheng enameled wire stripping machines!

Zhongshan Risheng enameled wire stripping machine: choose suitable products from our company - 'tapered' stripping fiber wheels or imported 'tapered fiber wheels' - and install them on the two shafts of the machine. The tapered part of the stripping wheel is upward, slightly adjust the gap, and start the power supply to make the machine run normally for a while. Turn off the switch when everything is OK. Place the configured mesh sand between the two cones and adjust the distance between the two stripping wheels to loosen them slightly. Restart the device and grind the contact surface of the two wheels by holding the professional mesh sand with your hand to make the contact surface between the two wheels more appropriate. After everything is ready and normal, you can try stripping with the same method. Trial stripping results: the Risheng GD-4 enameled wire stripping machine suits wire diameters of 0.038-0.75mm. The pressure between the contact surfaces of the two stripping wheels can be adjusted to achieve the ideal stripping result. Paint removal is then complete. The surface of the stripped (stripped) enameled wire is bright and clean.

When the Risheng enameled wire stripping machine is working, simply place the end of the enameled wire to be processed between the tapered surfaces of the stripping wheels and pull it out; the stripping is done in an instant. The principle of grinding off the insulation or oxide of the enameled wire is accomplished by the high-speed operation of the tapered peeling wheel. The stripped enameled wire has a brightly cleaned surface. If one enameled wire is used alone, the paint removal effect is remarkable. (Fine specifications can be multi-stranded.
The tapered paint stripping wheel produced by our company can use the shaft ring on the shaft to move the wheel upward, make a reasonable two-wheel movement, adjust it to the side with use value, repeat the above operation steps, and make it run until it is worn to the bottom of the entire wheel. For ease of operation, the wheels and shafts are inserted directly into the shaft by means of a static fit. So when replacing the new wheel, simply pull the old wheel straight out and insert it into the new wheel. Repeat the steps above and it should be working soon.

Zhongshan Risheng Hardware Products Co., Ltd. focuses on R&D, manufacturing and sales of enameled wire stripping machines, multi-strand wire strip ping machines, aluminum enameled wire strip ping machines sales, stripping machine production, enameled wire strip Patent leather machine ping, enamel film stripping machines, wire stripping machines, enameled wire stripping machine production and so on.