Risheng Hardware raises salaries by 200 yuan to boost employee motivation

Install a suitable grinding wheel on the machine, place one or more enameled wires in the middle of the two grinding wheels, adjust the two grinding wheels until the enameled wires are gently clamped, hold the coil part by hand and then start the switch to test the stripping (stripping) paint effect. The desired stripping (stripping) paint effect can be controlled by adjusting the pressure of the contact surfaces of the grinding wheels with each other. During operation, place the enameled wire between the two grinding wheels, then pull the enameled wire easily out from between the wheels, and the stripping is complete. The surface of the stripped (stripped) enameled wire is bright and clean.

Product Description:

This machine can strip, for example, about 30 ends of 0.10mm wire. While perfecting the machine products, the supporting products also need to keep up. However, it should be noted that different manufacturers have different products. Inevitably, there is a big problem of tension in the process of operation. The wire diameter is thicker, and there are more thread heads. The next consideration is to cooperate with the manufacturer to further improve the supporting fixture. Cooperate with the technical staff of the manufacturer to jointly develop the operation process.

Besides wire wheels, this machine can also be fitted with suitable stripping fiber wheels. The first step is to level the parallelism between the two rounds. The specific method is to adjust the gap between the two wheels according to the size of the special mesh sand skin, start the power supply, and repair the flatness of the two wheels with the mesh sand skin. At the same time, the adjustment device should also be carried out in conjunction. The leveled wheels are ready to work. Suitable for stripping wire diameter: 0.1—0.93mm range. Thin wires can be multi-stranded and are widely used in copper (aluminum) wires and copper-clad aluminum wires. The painted surface is bright, and the copper (aluminum) wire or copper-clad aluminum wire itself is absolutely harmless. The majority of users can use it with confidence and boldness according to their choice.