Success story: GD-6B enameled wire enamel removal machine

The GD-6B four-jaw enameled wire scraping machine | enameled wire stripping machine is uniquely designed using the latest processing technology. The tool material is made of four extra-hard tungsten alloy rods. Knife edge centripetal point cutting, taper adjustable principle. And the unique design of convenient and fast chip removal. Combined with the convenience of unloading and adjustment, and the flexible use of the safety shield, it is based on the user's thoughts and the user's urgency. The product has been trusted and praised by users in the process of being put on the market. This product solves the problem that the wire diameter is slightly bent and the one-time paint stripping is not clean during the current user's use. This product is currently an ideal product for users to trust and safety.
GD-6B enameled wire scraping machine, applicable wire diameter range: about 0.35-5mm. It can completely remove any hard insulating paint, enamel paint, ML, lsonel, etc. on the wire surface without damaging the copper wire itself. Especially suitable for

stripping right down to the coil bottom. Easy to operate with excellent results. GD-6B new modelEnameled wire stripping machineThere is a paint stripping length termination device, which can accurately control the paint stripping length of the enameled wire, and the paint stripping work is fast and safe without serious pollution and hazards.

Model	GD-6B Enameled Wire Stripping Machine	Applicable wire diameter	0.35 —5mm or so
Machine Dimensions	280*200*150mm	Operating Voltage	220V/50HZ
Motor power	120W	Motor speed	2800r/min
Machine Weight	6.0KG	Tool material	Made of hard tungsten steel alloy
Brand	Risheng Hardware	Stripping length	2mm—70mm

Operation method: [See the instruction manual of the operation example for details]
A. Plug into 220V/AC power supply.

B. Remove the shield from the blade head part first. Adjust the scraping edge according to the required scraping wire diameter; Loosen the fixed knife edge and the headless hexagon socket screw that needs to be positioned (see the illustration of the example figure for details).
C. Rotate the adjusting nut (to adjust the scraping opening: clockwise larger, counterclockwise smaller). Generally first set the opening slightly larger than the wire diameter, then clamp the wire end. Hold the enameled wire in one hand and adjust the nut with the other until the blade slightly rubs the surface of the enameled wire, then lock all the screws to be fixed.
D. The limiting pin is adjusted and locked, and the protective cover is installed.
E. Press the power switch and the motor starts running.
F. Hold the enameled wire that needs to be scraped flat and extend into the inlet, and begin to remove the paint.

Zhongshan Risheng Hardware Products Co., Ltd. is mainly engaged in the research and development, manufacturing and sales ofEnameled wire enamel removal machines, copper-clad aluminum enameled wire enamel removal machines, aluminum enameled wire enamel removal machine sales, enamel film removal machine production, enameled wire film removal machines, enamel removal machinesMainly production and so on.