Success story: GD-1 enameled wire enamel removal machine

GD-1 bench-typeEnameled wire stripping machine, features a uniquely designed 'full-contact' high-speed grinding wheel that automatically adjusts to the curvature of the wire and completely removes any hard insulating varnish from the wire surface without ever damaging the copper wire itself. In the absence of serious pollution and hazards, the paint stripping work is fast and safe.Suitable wire diameter range: 0.10mm—3.8mm or more, (adjusting device has been improved) Suitable for circular and square lines, and can handle multiple enameled wires at the same time.Easy to operate and excellent results.

Machine Model	GD-1 Enameled wire stripping machine	Applicable wire diameter	0．10－3.8mm
Machine Dimensions	380 x 285x 260mm	Operating Voltage	220v/50Hz
Motor power	370-550w	speed	3330r/min
Machine Weight	25kg	Optional accessories	Nylon or Wire Wheels
Belt size	730x30x2mm	Stripping length	3mm - Infinite

Installation and use:
Install a suitable grinding wheel on the machine, place one or more enameled wires in the middle of the two grinding wheels, adjust the two grinding wheels until the enameled wires are gently clamped, hold the coil part by hand and then start the switch to test the stripping (stripping) paint effect. The desired stripping (stripping) paint effect can be controlled by adjusting the pressure of the contact surfaces of the grinding wheels with each other. When working, place the enameled wire between the two grinding wheels, and then easily pull the enameled wire out from between the grinding wheels, the paint removal work is completed. The surface of the stripped (stripped) enameled wire is bright and clean.
Product Description:

This machine can strip, for example, about 30 ends of 0.30mm wire. While perfecting the machine products, the supporting products also need to keep up. However, it should be noted that different manufacturers have different products. Inevitably, there is a big problem of tension in the process of operation. The wire diameter is thicker, and there are more thread heads. The next consideration is to cooperate with the manufacturer to further improve the supporting fixture. Cooperate with the technical staff of the manufacturer to jointly develop the operation process.
Besides wire wheels, this machine can also be fitted with suitable stripping fiber wheels. The first step is to level the parallelism between the two rounds. The specific method is to adjust the gap between the two wheels according to the size of the special mesh sand skin, start the power supply, and repair the flatness of the two wheels with the mesh sand skin. At the same time, the adjustment device should also be carried out in conjunction. The leveled wheels are ready to work.Enameled wire stripping machineSuitable for stripping wire diameter: 0.1—0.93mm range. Thin wires can be multi-stranded and are widely used in copper (aluminum) wires and copper-clad aluminum wires. The painted surface is bright, and the copper (aluminum) wire or copper-clad aluminum wire itself is absolutely harmless. The majority of users can use it with confidence and boldness according to their choice.

Zhongshan Risheng Hardware Products Co., Ltd. is mainly engaged in the research and development, manufacturing and sales ofFlat Enameled Wire Enamel Removal Machine、Multi-strand wire paint remover、Aluminum Enameled Wire De-painting MachineSales,paint removerProduction,Enameled wire stripping machine、Unpainted Leather MachineMainly production and so on.