Zhongshan Risheng Stripping Equipment Parts
Professional manufacturer of enameled wire stripping machines - paint removal machines - stripping consumables
Best sellers
1 / 12
| Model | GD-4 |
|---|---|
| Applicable wire diameter | 0.028—0.75mm |
| Machine Dimensions | 280*200*195mm |
| Operating Voltage | 220V/50HZ |
| Motor power | 120W |
| Motor speed | 2800r/min and 5333r/min (wheel speed) |
| Machine Weight | 6.5KG |
| Optional wheels | Cone wheels and imported wheels (international sizes) |
| Belt size | Diameter 63 * 3.5mm |
| Stripping length | 2mm-Infinite Length |
以上为标准机型数据，线径、电压及配件可按需定制，具体请联系客服确认。
The new development of the GD-4 enameled wire grinder has undergone a thorough and critical update by our technical staff. It uses more advanced cutting-edge technology and a large number of imported accessories, including higher technical content. After repeated practice, it has been proved that the use effect is better, stronger and less noisy. The use of this product is greatly superior to similar products.Can be equipped with a vacuum cleaner
GD-4Enameled wire paint grinderApplicable wire diameter: 0.028—0.75mm
This practice proves that the use is better, stronger, and less noisy. The use of this product is greatly superior to similar products.
Installation and use
Choose the appropriate product of our company — "taper"Paint stripping fiber wheelor imported products "Taper Fiber Wheel", mounted on both axes of the machine. The tapered part of the stripping wheel is upward, slightly adjust the gap, and start the power supply to make the machine run normally for a while. Turn off the switch when everything is OK. Place the configured mesh sand between the two cones and adjust the distance between the two stripping wheels to loosen them slightly. Restart the device and grind the contact surface of the two wheels by holding the professional mesh sand with your hand to make the contact surface between the two wheels more appropriate. After everything is ready and normal, you can try stripping with the same method. Test the paint stripping effect, the pressure of the contact surfaces of the two paint stripping wheels can be completed by adjusting the device, and finally the desired paint stripping effect can be achieved.
Simply place the treated end of the enameled wire into theThe paint stripping wheelis pulled out between the conical surfaces, and the paint stripping work is completed in the blink of an eye. bya tapered paint stripping wheelHigh-speed operation to complete the principle of grinding off the insulation layer or oxide of the enameled wire. The stripped enameled wire has a brightly cleaned surface. If one enameled wire is used alone, the paint removal effect is remarkable. (Fine specifications can be multi-stranded.
Made by our companya tapered paint stripping wheelcan use the shaft ring on the shaft to move the wheel upward, make a reasonable two-wheel movement, adjust it to the side with use value, repeat the above operation steps, until it is worn to the bottom of the entire wheel. For ease of operation, the wheels and shafts are inserted directly into the shaft by means of a static fit. So when replacing the new wheel, simply pull the old wheel straight out and insert it into the new wheel. Repeat the steps above and it should be working soon.
Zhongshan Risheng Hardware Products Co., Ltd. is mainly engaged in the research and development, manufacturing and sales ofEnameled wire paint grinder、Multi-strand lineGrindLacquer machine,Aluminum enameled wireGrindLacquer machine sales,Grindlacquer machine production,Enameled wireGrindPatent leather machine,GrindPatent leather machine production and so on.
