| Model | GD-4 | Applicable wire diameter | 0.028—0.75mm |
| Machine Dimensions | 280*200*195mm | Operating Voltage | 220V/50HZ |
| Motor power | 120W | Motor speed | 2800r/min and 5333r/min (wheel speed) |
| Machine Weight | 6.5KG | Optional wheels | Cone wheels and imported wheels (international sizes) |
| Belt size | Diameter 63 * 3.5mm | Stripping length | 2mm-Infinite Length |
This practice proves that the use is better, stronger, and less noisy. The use of this product is greatly superior to similar products.
Installation and use
Choose the appropriate product of our company — "taper"Paint stripping fiber wheel or imported products "Taper Fiber Wheel", mounted on both axes of the machine. The tapered part of the stripping wheel is upward, slightly adjust the gap, and start the power supply to make the machine run normally for a while. Turn off the switch when everything is OK. Place the configured mesh sand between the two cones and adjust the distance between the two stripping wheels to loosen them slightly. Restart the device and grind the contact surface of the two wheels by holding the professional mesh sand with your hand to make the contact surface between the two wheels more appropriate. After everything is ready and normal, you can try stripping with the same method. Test the paint stripping effect, the pressure of the contact surfaces of the two paint stripping wheels can be completed by adjusting the device, and finally the desired paint stripping effect can be achieved.
Simply place the treated end of the enameled wire into the The paint stripping wheel is pulled out between the conical surfaces, and the paint stripping work is completed in the blink of an eye. by a tapered paint stripping wheel High-speed operation to complete the principle of grinding off the insulation layer or oxide of the enameled wire. The stripped enameled wire has a brightly cleaned surface. If one enameled wire is used alone, the paint removal effect is remarkable. (Fine specifications can be multi-stranded.
Made by our company a tapered paint stripping wheel can use the shaft ring on the shaft to move the wheel upward, make a reasonable two-wheel movement, adjust it to the side with use value, repeat the above operation steps, until it is worn to the bottom of the entire wheel. For ease of operation, the wheels and shafts are inserted directly into the shaft by means of a static fit. So when replacing the new wheel, simply pull the old wheel straight out and insert it into the new wheel. Repeat the steps above and it should be working soon.
Zhongshan Risheng Hardware Products Co., Ltd. is mainly engaged in the research and development, manufacturing and sales of Enameled wire paint grinder、Multi-strand line Grind Lacquer machine, Aluminum enameled wire Grind Lacquer machine sales,Grind lacquer machine production, Enameled wire Grind Patent leather machine,Grind Patent leather machine production and so on.
