Success story: GD-4 enameled wire stripping machine

GD-4 enameled wire grinding machine |Enameled Wire Stripping Machine(Newly developed) has undergone thorough key upgrades through painstaking efforts by our technicians, adopting more advanced cutting-edge technology and a large number of imported parts with higher technical content. Repeated practice has proven that its performance is more outstanding, powerful and quiet. The use of this product is greatly superior to similar products.

Model	GD-4 Enameled Wire Stripping Machine	Applicable wire diameter	0.028—0.75mm
Machine Dimensions	280*200*195mm	Operating Voltage	220V/50HZ
Motor power	120W	Motor speed	2800r/min and 5333r/min (wheel speed)
Machine Weight	6.5KG	Optional wheels	Cone wheels and imported wheels (international sizes)
Belt size	Diameter 63 * 3.5mm	Stripping length	2mm-Infinite Length

This practice proves that the use is better, stronger, and less noisy. The use of this product is greatly superior to similar products.
Installation and Use

Choose suitable products from our factory - 'tapered'Paint stripping fiber wheelor imported products "Taper Fiber Wheel", mounted on both axes of the machine. The tapered part of the stripping wheel is upward, slightly adjust the gap, and start the power supply to make the machine run normally for a while. Turn off the switch when everything is OK. Place the configured mesh sand between the two cones and adjust the distance between the two stripping wheels to loosen them slightly. Restart the device and grind the contact surface of the two wheels by holding the professional mesh sand with your hand to make the contact surface between the two wheels more appropriate. After everything is ready and normal, you can try stripping with the same method. Test the paint stripping effect, the pressure of the contact surfaces of the two paint stripping wheels can be completed by adjusting the device, and finally the desired paint stripping effect can be achieved.
Simply place the treated end of the enameled wire into theThe paint stripping wheelis pulled out between the conical surfaces, and the paint stripping work is completed in the blink of an eye. The principle of grinding off the insulation or oxide of the enameled wire is accomplished by the high-speed operation of the tapered peeling wheel. The stripped enameled wire has a brightly cleaned surface. If one enameled wire is used alone, the paint removal effect is remarkable. (Fine specifications can be multi-stranded.
Our factory producesa tapered paint stripping wheelcan use the shaft ring on the shaft to move the wheel upward, make a reasonable two-wheel movement, adjust it to the side with use value, repeat the above operation steps, until it is worn to the bottom of the entire wheel. For ease of operation, the wheels and shafts are inserted directly into the shaft by means of a static fit. So when replacing the new wheel, simply pull the old wheel straight out and insert it into the new wheel. Repeat the steps above and it should be working soon.

Zhongshan Risheng Hardware Products Co., Ltd. is mainly engaged in the research and development, manufacturing and sales ofEnameled Wire Stripping Machine、Multi-Strand Wire Stripping Machine、Aluminum Enameled Wire Stripping MachineSales,Lacquer stripperProduction,Enameled Wire Stripping Machine、Leather stripping machineMainly production and so on.