GD-1 Flat Enameled Wire Stripping Machine

GD-1 new flat enameled wire stripping machineComprehensive performance is superior to other manufacturers' machines on the market. It has high precision, low drying sound, the body is produced with baking paint, and the paint surface is more beautiful and durable. The main components are made of imported materials and all imported products. Belt shield andThe steel wheel shield is made of 304 stainless steel, and the appearance and wear resistance of the fuselage are several times that of the original steel shield.The use of "full contact" high-speed steel wire grinding wheels and fiber grinding wheels can automatically adjust the curvature of the wire body, and completely remove any hard insulating paint, enamel paint, ML, lsonel, etc. on the wire surface, without damaging the copper (aluminum) wire itself. Paint stripping is quick and safe in the absence of severe contamination and hazards. Suitable wire diameter range: 0.08mm-3.81mm, suitable for round and flat wires, and can handle multiple enameled wires at the same time. Convenient operation and excellent results.Can be equipped with a vacuum cleaner

Installation and Use
Select the appropriate paint stripping wheel, install it on the machine, place the enameled wire in the middle of the two paint stripping wheels, adjust the two paint stripping wheels until the enameled wire is gently clamped, hold the coil part by hand and then start the switch to test the paint stripping effect. The pressure of the contact surface between the paint stripping wheels can be adjusted to control the desired paint stripping effect.
When working, the enameled wire is placed in the middle between the two stripping wheels, and then the enameled wire is easily pulled out from between the stripping wheels, and the stripping work is completed, because when the machine is working, the stripping wheel rotates at a high speed to grind off the insulating paint or oxide of the enameled wire, and the surface of the stripped enameled wire is bright and clean.
When the surface of the nylon fiber paint stripping wheel is uneven or uneven during work, it will cause broken wires or unclean paint stripping. At this time, the paint stripping wheel needs to be trimmed. You can use abrasive cloth to trim and polish the paint stripping wheel until the two peeling wheels can be in smooth contact, and the paint stripping wheel can be trimmed regularly during work, which can increase the service life of the paint stripping wheel.
When you need to replace the paint stripping wheel, simply pull the paint stripping wheel that can no longer be used from the shaft and insert a new paint stripping wheel to start working again. (Pay attention to the directionality of the wire wheel when installing the wire stripping wheel)
 Product Description:
The machine can bestripped of paintFor example, the wire diameter is about 0.30 mm and there are about 50 heads. While perfecting the machine products, the supporting products also need to keep up. However, it should be noted that different manufacturers have different products. Inevitably, there is a big problem of tension in the process of operation. The wire diameter is thicker, and there are more thread heads. The next consideration is to cooperate with the manufacturer to further improve the supporting fixture. Cooperate with the technical staff of the manufacturer to jointly develop the operation process.
In addition to using steel wire wheels, this machine can also select suitable paint stripping fiber wheels. The first step is to level the parallelism between the two rounds. The specific method is to adjust the gap between the two wheels according to the size of the special mesh sand skin, start the power supply, and repair the flatness of the two wheels with the mesh sand skin. At the same time, the adjustment device should also be carried out in conjunction. The leveled wheels are ready to work. Suitable for stripping wire diameter: 0.1—0.93mm range. Thin wires can be multi-stranded and are widely used in copper (aluminum) wires and copper-clad aluminum wires. The painted surface is bright, and the copper (aluminum) wire or copper-clad aluminum wire itself is absolutely harmless. The majority of users can use it with confidence and boldness according to their choice.

Zhongshan Risheng Hardware Products Co., Ltd. mainly integrates R&D, manufacturing, and sales of flat enameled wire stripping leather machines, enameled wire stripping machines, multi-strand wire stripping machines, aluminum enameled wire stripping machines, paint stripping machine production, enameled wire stripping leather machines, and so on.

Related Products Enameled wire paint removal machine belt Interfaceless continuous enameled wire stripping machine belt Enameled wire paint removal blade | stripping blade Enameled wire paint removal machine fibre grinding wheel | stripping wire wheel Enameled wire paint removal blade | paint removal blade

Customers are welcome to sample test and paint stripping products customization!Welcome to sample test and peeling paint product customization ! Your browser does not support HTML5 video tags.

Lacquer wire stripping machine Lacquer wire wheel Lacquer wire scraper Lacquer scraper ABISOFIX Portable Lacquer wire stripper Lacquer leather machine Three-layer insulated wire heat stripper Lacquer wire twisting machine Lacquer fiber wheel Tapered grinding wheel Lacquer head Steel wire wheel Parallel steel wire wheel Steel wire roller brush Contact usLocation: Yong 'an Road, Dongxing Community, Dongfeng Town, Zhongshan CityPhone: 0760-23800032Fax: 0760-23899875Zip code: 528411Mobile: 13928191922Email: boqiji168@126.comNational Service HotlineWeChat sweep13928191922(©) 2016 Zhongshan Risheng Hardware Products Co., Ltd.WeChat sweepQQ Sweep13928191922